Engineered Comfort fan coil units are the only true commercial quality fan coil units available today. They are also the most versatile units on the market. Engineered Comfort offers heavy-duty commercial construction, commercial type control sequences, superior motor control, and the largest list of options and features found in fan coil units today. Engineered Comfort EPIC™ Fan Technology will save 67% of the fan energy at typical set points (more at others), which gives the owner a major reduction in electrical usage. The motor/blower combinations are mounted on special 16 ga. angles and isolated from casing with rubber insulators for minimum noise generation. Engineered Comfort offers stand-alone controls that provide a commercial style operating sequence unique to fan coils. This allows the owner to take advantage of room diversity by modulating water and air flows to meet demand while also providing additional energy savings at the fans, pumps and chillers. Engineered Comfort controls also fix the discharge air temperatures off the coils. This feature causes the latent work to occur early in the cooling cycle, which decreases humidity (even in part-load conditions), improves comfort, and raises the indoor sensible comfort level, again saving energy. Engineered Comfort’s stand-alone controls are also available in a native BacNet model, which includes full DDC communication with the Building Automation System. Engineered comfort also features an option of applied UV lights in the coil section of the fan coils. These lights are specially designed for fan coil applications to eliminate any UV radiation from shining through the coil and into the room. Using UV lights in the fan coils cleans the coil surfaces, reduces the need for coil cleaning, and reduces the circulation of microbes, which helps eliminate common:

• Allergy Asthma
• Upper respiratory ailments
• Headaches
• Sinus congestion
• Even Colds and Flu

The units are designed for easy installation, and with modular construction, easy repair. Every component is designed with plug and play technology to minimize or nearly eliminate any time the technician might have to spend in the occupied space in the event that something goes wrong. All units are certified by ARI and listed by ETL and display the ARI and ETL symbols. They are available with chilled water hot water coils and/or electric heat. Coil options allow for 3 or 4 row cooling coils with 1 row or 2 row heating coils when the coils are in combination. Stand-alone coil options are 3 to 5 row cooling coils and 1 to 4 row heating coils. All drain pans are made from 304 stainless steel with closed cell insulation on the outside. Factory supplied controls are tested and calibrated at the factory. Custom needs that are job specific can be incorporated into the units The units are shipped completely assembled to reduce field labor cost. All units are fully inspected and run tested at the factory to eliminate potential problems at start up.